How to Open Shampoo Pump

Struggling to work out how to open that pesky shampoo pump bottle? You’re not alone! It can be a huge hassle, especially when you’ve got shampoo flowing down the sides of your hands! Not to worry — in this article, we’ll provide you with a step-by-step guide on how to open a shampoo pump with ease.

This article is perfect for people of all ages, whether you’re a tech-savvy teen, an elderly adult, or a frazzled parent. We’ll provide you with tips and tricks, as well as eye-catching visuals along the way to help you get the most out of your shampooing session. So sit back and relax, because with our help, you’ll be able to open your shampoo pump in no time!

How do you open a shampoo pump that won’t open?

Image Source: Instagram @shijie_packaging

The first step to open a shampoo pump that won’t open is to make sure that the pump dispenser is clean and dry – any dirt or residue may trigger the pump to fail.

Secondly, place your thumb over the valve in the bottle, then press the pump downwards.

This will help to dislodge the valve, allowing the shampoo to flow out freely. If the valve is still jammed after attempting the above steps, a small amount of hot water should do the trick.

See also  Enjoy Hair Care Products Hot Tooling Review

Then simply fill up the bottle with hot water, and allow the water to circulate and loosen the clogged valve.

Alternatively, you can also take the pump apart and clean it with a q-tip, as this will remove any built-up residue and allow the pump to work again.

Once the valve has opened, rinse out the shampoo to ensure that the residue has been completely washed away.

How does a shampoo bottle pump work?

Image Credit: Instagram @shijie_packaging

A shampoo bottle pump consists of a long thin pump component, usually made of plastic, which fits tightly against a sealed container.

When you press down on the pump, a small amount of shampoo is forced through a tiny hole at the top of the pump, into a cup-shaped chamber at the bottom.

From there, you’re able to pump the shampoo to your hands or hair.

A shampoo pump also ensures that you do not use too much shampoo every time you use it.

The small amount of shampoo that is dispensed each time is just enough for a single application.

As a result, you can be sure you’re not wasting any shampoo, helping to reduce your environmental impact and save money.

Furthermore, most shampoo pumps come with a lockable lid.

This means you can easily take them with you when you travel and avoid any mess or spills.

Through its clever design and simple mechanics, a shampoo bottle pump offers a simple, easy, and efficient way to dispense shampoo, while minimizing wastage and mess.

How do you open a hair pump?

Image Source: Instagram @shijie_packaging

To open a hair pump, it is important to locate the cap or lid of the pump, as this is the gateway to the inner workings of the pump.

On most standard shampoo pumps, the cap features a small notch at the center, making it easy to grip and pull off.

After removing the cap, you will likely find a rubber stopper that sits inside the neck of the pump.

See also  Center Stage Braiding Is Art

With a bit of firm pressure from the heel of your hand, you should be able to push the stopper inwards.

As the stopper is pushed in, you’ll feel a slight pop, which is an indication that the pump is ready for use.

Some shampoo pumps may require a bit more muscle to open. If the stopper is tight, try using a pair of pliers or a small screwdriver to push it in or up.

You may also opt to use a flathead screwdriver, which can easily turn and remove the cap. If the lid is tight and won’t budge at all, you may need to get a bit more aggressive and use a pair of wire cutters.

How do you lock a shampoo pump?

Image Source: Instagram @shijie_packaging

To lock a shampoo pump, all you need to do is twist the pump head clockwise, as if you were shutting off a valve.

When you already locked it, it should be facing the same direction as the rest of the bottle.

If the head of the pump is facing the right direction, then it means that the shampoo pump is locked.

It’s important to make sure that you lock the pump so as to not have any leakage when you don’t want it to be there.

Thus, locking the pump will prevent any of the dangerous or slippery accidents from happening.

How long should you keep a bottle of shampoo?

Image Source: Instagram @loly_lommachine_lompacking

Generally speaking, you should keep a bottle of shampoo last anywhere from 6 to 8 weeks depending on how frequently it’s used.

You should keep a bottle of shampoo

It’s important to keep an eye on your bottle of shampoo and make note of when you first opened it.

When shampoo is stored for too long, it can be already contaminated, which weakens the solution and reduces its effectiveness.

This means it will do an inferior job at cleaning the hair, just as putting too much shampoo in the hair can lead to an inadequate cleaning job.

Meanwhile, iff you’re using a large bottle of shampoo, try and use it throughout the month to ensure it doesn’t spoil or go off and consider keeping smaller bottles or travel sizes to use on trips.

See also  Denorex Shampoo Discontinued

If you’re not sure whether or not it’s time to open a new bottle of shampoo, it’s always better to have an initiative and change it sooner rather than later.

How do you fix a pump that won’t pop up?

Image Source: Instagram @chongwoo_co_ltd

To fix a pump that won’t open, check first and make sure the cap is not on too tight or vice versa.

Often times, the issue can be solved by just simply adjusting the cap and making sure it’s on securely.

If that doesn’t work, take a look and see if the air intake is blocked by dirt or debris.

Taking a soft brush and gently cleaning out the air intake can help to solve this issue.

However, you might need to remove the bottle’s neck to do this, in which case it would be best to use a pair of needle nose pliers, just make sure to be gentle in order to avoid any damage.

If that doesn’t still work and the pump still isn’t popping up, try lubricating the pump by applying a few drops of liquid soap to the pump and manually trying to press the pump several times.

Lastly, if the pump still isn’t working, you may need to replace either the pump, the air intake valve, or both.


In conclusion, opening up a shampoo pump is actually quite simple and easy – all you need is a simple tool or even your own hands. With these tips, you can easily loosen a stubborn pump and enjoy a luxurious wash experience.

So don’t be afraid of a stubborn shampoo pump; pick up the right tool or just use your own hands and it’ll open right away.

Similar Posts